1. Skip to Menu
  2. Skip to Content
  3. Skip to Footer

Better, faster, more economical!

PolyUrethane Foam (PUF) is ideal in combination with the design of ventilated facades, such as siding, alluminium facades, curtain style ceramic facades. At the same time it serves as hydro and thermal insulation and reduces the cost of building materials and installation of it on a site (less labor time). The cost reduction is due to the fact that it is not required to design and implement multi-layered system of thermal, hydro and vapor (steam) insulation. PUF is applied by a single seamless layer which is the monolith insulation coating and can be applied on any surface area as a single insulation layer.

Many people think when they buy a new home, that it is modern construction. In reality, most homes built in Thailand for the last ten years , and even a house under construction, use antiquated technical standards and out-of-date methods for building and isolation. Only after receiving the electricity bill, owner or renterer understands the level of energy efficiency.

That's where you should think about modern insulation - sprayed polyurethane foam. Depending on the size and thickness of the insulation you can reach up to 40 - 50 % savings on energy costs.


Main advantages of polyurethane insulation
• The best known among thermal insulation materials with best resistance for high temperatures
• An uniconsistant layer without seams and technological compounds – entire impermeability of all sealing layers
• Thermal and waterproofing obtained by one spraying process
• High adhesion (sticking) to the surfaces with different configuration (material retains predetermined shape, does not peel)
• Effective longevity
• Applied on any wood PUF does not cause dampness and rot. It has complet and long term sterility
• Resistant to rot, fungus and any existing bacteria
• Additionally raises the frame structure enhances
• Additional sound insulation
• Keeps the temperature in the house during the day (sunny) time
By those reasons PUF saves energy and your money

It is possible and usefull to apply PUF on walls
Attics and garrets
Warehouses and refrigerators
Monolithic structures, vaulted halls, other architechtural modules

PolyUrethane Foam (PUF) is ideal in combination with the design of ventilated facades, such as siding, alluminium facades, curtain style ceramic facades. At the same time it serves as hydro and thermal insulation and reduces the cost of building materials and installation of it on a site (less labor time). The cost reduction is due to the fact that it is not required to design and implement multilayered system of thermal, hydro and vapor (steam) insulation.
PUF is applied by a single seamless layer which is the monolith insulation coating and can be applied on any surface area as a single insulation layer.

By applying sprayed polyurethane foam on ventilated attic, you achieve:
• To reduce uncontrolled air and temperature leakage through ceilings, walls, attics and other constructions
• To reduce costs due to air-conditioning, to reduce air leaks and to improve total space’s insulation
• To allow the ventilation system and building air conditioning system to operate at a moderate temperatures, because the inside space is isolated from the external environment.

Most ventilation and Air-Con systems occupy a lot space and loose a lot of air and temperature.
• You can increase the energy efficiency of equipment, to improve the efficiency of moisture removal (drainage)
• There is an opportunity to reduce and to prune the ventilation system and conditioning for better performance.
• All this is your way to